Stage_2_WM

 

Stage 2  Street Series 2100 Clutch Kit
This assembly provides up to 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Brass Plus material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300-mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering).

The 2100 Series kit includes a performance pressure plate, a high torque sprung disc with anti-burst steel backed Brass Plus facings, all applicable bearings, and the appropriate alignment.

VIEW APPLICATIONS 


 Stage_3_WM

 

 

Stage 3  Street/Strip Series 2600 Clutch Kit
This segmented Ceramic material with a performance pressure plate will provide the ultimate in street and strip combinations. This assembly is suited for up to 150% increase in torque capacity. Provides quick but smooth engagement and extended life. 300-mile break-in recommended with this set-up.

The 2600 Series kit includes a performance pressure plate, a high torque sprung disc with segmented Ceramic facings, all applicable bearings, and the appropriate alignment tool.

VIEW APPLICATIONS


 Stage_4sprung_WM

 

 

 

Stage 4 Sprung  Strip Series 1620 Clutch Kit
This assembly, available with a six puck sprung plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity. 300-mile break-in recommended with this set-up.

The 1620 Series kit includes a performance pressure plate, a six-puck high torque sprung disc with Ceramic buttons, all applicable bearings, and the appropriate alignment tool.

VIEW APPLICATIONS

 Stage_5_unsprung

 

 

 

Stage 5 Sprung – Strip Series 1420 Clutch Kit
This assembly, available with a double spring, six-rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300-mile break-in recommended with this set-up.

The 1420 Series kit includes a performance pressure plate, a four puck high torque sprung disc Ceramic buttons, all applicable bearings, and the appropriate alignment tool.

VIEW APPLICATIONS 


 Stage_5_unsprung

 

 

 

Stage 5 Rigid – Strip Series 0420 Clutch Kit

This assembly, available with a rigid plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 300% increase in torque capacity. 300-mile break-in recommended with this set-up.

The 0420 Series kit includes a performance pressure plate, a four-puck high torque rigid disc with Ceramic buttons, all applicable bearings, and the appropriate alignment tool.

VIEW APPLICATIONS


 

subaru-mpc-3

 

 

 

MPC
Competition Clutch Multi-plate Clutch Kit with Flywheel provides a drastic increase in horsepower holding capacity with excellent driveability characteristics. The new clutch kit provides the ideal balance of sport driving and daily driving clutch use.
VIEW APPLICATIONS

 


 MultiPlate_WM

 

 

 

Multiplate
The CCI twin disc provides the most economical racing clutch for the active sport compact enthusiast. This ceramic twin disc comes with a 4140 forged steel flywheel and a 6061 T6aluminum cover complimented with a 6150 steel diaphragm. These units are rated to hold 500 to 1200hp (depending on application).

VIEW APPLICATIONS 


 2-630t-stu-wm-lores2-671-stu-wm-lo-res

 

 

 

Flywheels
Competition Clutch flywheels are made of 4140 forged steel and are a one-piece design. This helps significantly in reducing the chances of ring gear separation and friction surface warpage. All flywheels can be resurfaced. The correct flywheel step can be obtained in the CCI catalog or by calling us direct. Flywheel weights vary from 8lbs to 18lbs depending on application.

The lightweight steel flywheel (ST suffix) is recommended for naturally aspirated and/or street driven applications. This flywheel preserves low-end torque and driveability. Well-suited for Gravity, Stage 1 and Stage 2 clutch applications.

The ultra lightweight steel flywheel (STU suffix) is recommended for forced induction and/or track and rally racing applications. This flywheel is machined with less material to assist in quicker revving capabilities.

Well-suited for Stage 3 and up clutch applications. These flywheels will work with ALL performance and stock clutch assemblies. Not all applications have the ST and STU versions available. Please verify before ordering. All flywheels are SFI certified.

VIEW APPLICATIONS